Showing 33–48 of 78 results

Elitex Tenter Frame model 4580.35, 1995 yr

Min working width: 90 centimeters
Max working width: 210 centimeters
House information: 9 zones (1pre heat zone and 8 zone standard) 2 burners per zone, 4,500,000 BTUs, Simatic Touch Sceen Control,Natural Gas Heated, Max Temp 230c (446F)
Chain information: Clip Type (woven goods), 342 clips per side.
Pre Entry Equipment: Boschert pneumatic feed roll, 3 roll wash box with double dip, Elitex Pad, E&L guiders
Post Exit Equipment: Menzel Pull Roll (2008 year) and Auto Wind Up (200cm).

Inventory Number: 16305

image_pdfimage_print

Generic Tank 134 Gallons cap.

Generic Tank model 134 Gallons
34″ diameter X 32″ L SS, cone bottom, add tanks, 15″ legs, top rinse ring, 4 steam coils bottom, air, mixers, pumps, 134 Gallon Cap.

Inventory number: 15807

Generic Tank 156 Gallons cap.

Generic Tank model 156 Gallons
37″ diameter X 32″L Cone bottom, SS add tanks, 12″ legs, electric mixer, 156 Gallons Capacity.

Inventory number: 15806

Intra Inspection Line 90 inch width

1 – 90” Intra Inspection Line includes:

1 – Entry Large 40” diameter Roll Lift on to Incline Table.
2 – Entry 84”W X 88” L Incline Table feed the Center Unwind.
3 – 90” Center Unwinder , with 3 Air Bars.
4 – 90” Intra Inspection Machine Light Board, Yardage Counter , Electric Drive Motor.
5 – Operator Platform.
6 – 94” Two Roll Surface Winder , 14”Diameter Rolls, Dual Motor separate Drive for each Roll, Control fabric Density .
7 – 90” Harden Roll Slitter ,Compression Knife Cutters system prior to Roll up.
8 – Exit 84”W X 82” L Dump incline Table.
9 – America 2000 Lb Roll Lift.

Inventory Number: 16142

Krantz A-Frame Batcher model 140″ width

Krantz A-Frame Batcher model A -Frame 140″
Year: 2002, 140″ Center or Surface winder,
Tension Rolls, Driven Scroll Rolls, Compensator,
J Scray, AC Drives System, A-frame guiding system.

Inventory Number: 15439

Krantz Scray model 150″

Year: 2004
Width: 150 inches
Top pull roll, nip/motor, fix scray with adjustable side panels, stainless steel scray. Entry driven stainless steel scroll roll, motor, controls.

Inventory number: 15924

Kusters Pad model 222.53-3400

Year: 1987
Type: Pneumatic
Width: 134 inches
Number of rolls: 2
Roll diameter: 12 inches single swim roll, rubber over rubber, single dip with swing out pan, Tandematic plate uncurlers, with spare roll, motor and control

Inventory number: 15426

La Meccanica Conveyor and Distribution system

Automatic PLC
Year: 1999
Automatic La Meccanic conveyor and Distribution system; Includes the following: 14 – 12′ Straight conveyors, 1 -turn around section, 1 incline section to 13 – Distribution Stations, 1 – single , 6 dual station with each station has pneumatic skid lifting forks with a gradual decending system when roll transfer, 2 ticketing robots and lazer bar code digital readers, AC / PLC programable system
Inventory number: 16014

La Meccanica Inspection/Distribution System

La Meccanica Inspection/Distribution System model Lm-83,lm-37; Year: 1999; Inspection/Wrapping/ Conveyor Distribution Line
Includes the following:

A. 2 -80″ La Meccanica AC Inspection machine consist of Model Lm-83, Lm-37, A Frame Portable winder,Entry pull roll, Tensionless loop system, driven scroll roll, 2- digital fabric yardage counters, inspection board, operator computer, operator platform, two roll surface winder with hold downs,dual motor drives to control roll density, 50 tube feed system adjustable lenghts, sample cross cutters, single cross cut, 6″ dual cross cut with conveyor sample removal, Automatic fabric 3 roll taping system, doffing cradle to conveyor, 80 meters/min.

B.Automatic La Meccanic conveyor and Distribution system, Includes the following: 14 – 12′ Straight conveyors, 1 -turn around section, 1 incline section to 13 – Distribution Stations, 1 – single , 6 dual station with each station has pneumatic skid lifting forks with a gradual decending system when roll transfer, 2 ticketing robots and lazer bar code digital readers, AC PLC programable system.

C. 1999 90″ La Meccanica Polyethylene film wrapping machine, Model Pakco -2500-C with length seamer, U clip automatic end tying system
AC Sieman PLC , 415 V.A.L., 80 meters/minute.

Inventory number: 16022

La Meccanica LM83 and LM37 Inspection Frames 80″

La Meccanica Inspection model 90″ AC-PLC Controls
Year: 1999
2 -80″ La Meccanica, AC – Siemen PLC Contoller. Inspection machine consist: Model Lm-83, Lm-37, A Frame Portable winder, Entry pull roll, Tensionless loop system, driven scroll roll, 2- digital fabric yardage counters, inspection board, operator computer, operator platform, two roll surface winder with hold downs, dual motor drives to control roll density, 50 tube feed system adjustable lengths, sample cross cutters, single cross cut, 6″ dual cross cut with conveyor sample removal, Automatic fabric 3 roll taping system, doffing cradle to conveyor, 80 meters/min.

Inventory number: 16018

La Meccanica Pako Fabric Roll Wrapping machine 86 inch width

La Meccanica Wrapping model Pako -25000
Year: 1999
– 86″ La Meccanica Automatic Fabric roll plastic wrapping machine, Model Pakco -2500-C with length seamer, U clip automatic end tying system, AC / PLC Programmable, 415 V.A.L.,

Inventory number: 16016